/usr/share/ghostscript/lib
Edit: /usr/share/ghostscript/lib/ps2epsi.ps (6070B)
% Copyright (C) 2001-2021 Artifex Software, Inc.
% All Rights Reserved.
%
% This software is provided AS-IS with no warranty, either express or
% implied.
%
% This software is distributed under license and may not be copied,
% modified or distributed except as expressly authorized under the terms
% of the license contained in the file LICENSE in this distribution.
%
% Refer to licensing information at http://www.artifex.com or contact
% Artifex Software, Inc., 1305 Grant Avenue - Suite 200, Novato,
% CA 94945, U.S.A., +1(415)492-9861, for further information.
% Convert a PostScript file to an EPSI file, adding the Preview Image.
% If the file is already EPSF, then skip the creation of an EPSF, and
% only add the preview. A warning is issued if the %%Pages: comment
% indicates that there is more than a single page in the input file.
% Expected invocation:
% gs -q -dNOOUTERSAVE -dNODISPLAY -dLastPage=1 -sOutputFile=out.epsi --permit-file-read=in.ps -- ps2epsi.ps in.ps
% Usually this will be invoked by the ps2epsi script (or .bat or .cmd versions)
false % no errors from initial param check
% NOOUTERSAVE is needed for the SAVE to not remove the tempfile (if one was needed)
vmstatus pop pop 0 gt { (Error: missing -dNOOUTERSAVE option) = pop true } if
% NODISPLAY may not be strictly needed, but we don't want to open the default device
/NODISPLAY where { pop } { (Error: missing -dNODISPLAY option) = pop true } ifelse
% LastPage is needed if we are using eps2write on a PostScript (or PDF) file that has multiple pages.
/LastPage where { pop } { (Error: missing -dLastPage option) = pop true } ifelse
% OutputFile is needed so that it gets on the permit-file-writing list
/OutputFile where { pop } { (Error: missing -sOutputFile option) = pop true } ifelse
.shellarguments not count 3 lt or count -1 roll or
{
(usage: gs -q -dNOOUTERSAVE -dNODISPLAY -dLastPage=1 -sOutputFile=out.epsi --permit-file-read=in.eps -- ps2epsi.ps in.ps) =
quit
} {
dup /InputFile exch def
(r) file /I exch def
} ifelse
/O OutputFile (w) file def
/S 65535 string def
/R { I S readline not { (Error: Unexpected end of file.) = quit } if } bind def
/WL { O exch writestring O (\n) writestring } bind def % Write with linefeed
/TName null def
/EPSFheader (%!PS-Adobe-3.0 EPSF-3.0) def
% Read the header to check if this file was EPSF
R
dup EPSFheader ne {
% InputFile was not EPSF
pop % discard the first line of the InputFile
% run the file through eps2write (into a tempfile) to make an EPSF
(_ps2epsi) (w+) .tempfile closefile /TName exch def
/SAVE save def
(eps2write) finddevice mark /OutputFile TName 3 index putdeviceprops pop
setdevice
InputFile run
SAVE restore
/I TName (r) file def
R
} if
WL % Write the first line (either from InputFile or the tempfile
% From the "5002 Encapsulated PostScript File Format Specification Version 3.0 1 May 1992"
% The preview section must appear after the header comment section, but
% before the document prologue definitions. That is, it should immediately
% follow the %%EndComments: line in the EPS file.
{ % loop until we see the %%EndComments line, writing those lines to output
R
dup (%%EndComments) anchorsearch exch pop { % discard the match or extra copy of the string
pop exit % found it
} if
% Check the %%Pages: comment to issue a warning if there is more than one page.
dup (%%Pages:) anchorsearch exch pop { % discard the match or extra copy of the string
cvi 1 gt {
(Warning: EPSI files can only have 1 page, Only the first page will be in the preview.) =
} if
} if
% Collect the BoundingBox data that will be used when generating the preview
dup (%%BoundingBox:) anchorsearch exch pop { % discard the match or extra copy of the string
mark
exch token not { (Error: invalid BoundingBox parameters) = quit } if
exch token not { (Error: invalid BoundingBox parameters) = quit } if
exch token not { (Error: invalid BoundingBox parameters) = quit } if
exch token not { (Error: invalid BoundingBox parameters) = quit } if
exch pop ]
/BBox exch def
% Preview dimensions
/PWidth BBox dup 2 get exch 0 get sub def
/PHeight BBox dup 3 get exch 1 get sub def
} if
WL % send to output file with linefeed.
} loop
WL % send to output file with linefeed.
% If the InputFile already has a preview, skip past it
R
dup (%%BeginPreview) anchorsearch exch pop { % discard the match or extra copy of the string
pop
% Read lines until after the %%EndPreview
{
R
(%%EndPreview) anchorsearch exch pop { % discard the match or extra copy of the string
pop pop exit % found it
} if
} loop
% Get the next line for use after the generated preview
R
}
if
/LineAfterEndComments exch def
//null (w+) .tempfile
closefile % will be opened by bit device
/Pname exch def
(bit) selectdevice
<<
/GrayValues 256 % Gray, not monochrome
/OutputFile Pname
/TextAlphaBits 4
/GraphicsAlphaBits 4
/LastPage 1 % TBD: does this work?
/.IgnoreNumCopies true
/Install { BBox 0 get neg BBox 1 get neg translate { 1.0 exch sub } settransfer } % EPSI 00 is white
/HWResolution [ 72. 72. ]
/PageSize [ PWidth PHeight ]
>> setpagedevice
InputFile run
/P Pname (r) file def % Preview data file
/SP PWidth string def % One string per image line
% Write the preview
O (%%BeginPreview: ) writestring
O PWidth write==only O ( ) writestring
O PHeight write==only O ( 8 ) writestring
O PHeight PWidth 39 add 40 idiv mul write== % 40 bytes per line
O flushfile
0 1 PHeight 1 sub {
pop
P SP readstring pop
0 40 PWidth {
O (% ) writestring % 82 bytes on each line, plus EOL
SP exch 40 PWidth 2 index sub .min getinterval
O exch writehexstring
O (\n) writestring
} for
pop
} for
(%%EndPreview) WL
% Write the line that followed the %%EndComments
LineAfterEndComments WL
% Copy the remainder of the inputfile
{
I S readstring exch O exch writestring not { exit } if
} loop
% If we created a tempfile, delete it
TName null ne { TName deletefile } if
quit